When Rooftop Equipment Needs a Lift
Cooling towers, chillers, and large air handlers don't fit in a freight elevator or a stairwell. On mid-rise and high-rise buildings, getting new mechanical equipment onto the roof — or a failed unit off it — usually means going over the edge, not through the building. Most of the time that's a crane. When a crane can't get there, it's a helicopter.
Crane Lift Rigging — South Florida
- Rigging plans sized to the equipment and the building's roof structure
- Municipal permitting and, where needed, temporary street or lane closures
- Coordination with HOA and condo boards on scheduling and resident notice
- Temporary tie-ins so cooling isn't down longer than the lift itself
A Project We've Lifted
Ocean Two Condominium, Sunny Isles Beach — full cooling tower replacement with crane lift and rigging, temporary tie-in, and complete piping and electrical reconnection. See our full project portfolio →
Helicopter Lift HVAC Installation — Anywhere in Florida
When a building has no street clearance, no crane pad, or height and setback restrictions that rule out a ground-based crane entirely, the equipment goes in by air. Good Air is the mechanical contractor of record on these projects — we engineer the rigging, prep the equipment and the roof, and coordinate with a licensed helicopter lift operator to fly cooling towers, chillers, and air handlers directly onto the building.
We take these projects anywhere in Florida, not just our home service area. If your building needs a helicopter lift for HVAC equipment, call the mechanical contractor who knows how to rig it — not just a charter company that can fly it.
Planning a rooftop equipment change?
Crane lift, helicopter lift, or standard rigging — talk to our commercial team before you plan the project.
Frequently Asked Questions
Why would a building need a crane lift instead of just carrying equipment up?
Cooling towers, chillers, and large air handlers are too big and heavy for a freight elevator or stairwell. On mid-rise and high-rise buildings, a crane lift over the roof edge — or through a light well — is often the only way to get new equipment in or old equipment out.
Do you handle the permits and street closures for a crane lift?
Yes. Rooftop crane lifts in South Florida usually require a municipal permit and, in dense areas, a temporary street or lane closure. We coordinate the permit, the rigging plan, and the closure schedule so the building isn't guessing.
What if a crane truck can't reach the roof at all?
Some high-rises have no street clearance, no crane pad, or setback and height restrictions that rule out a ground-based crane entirely. For those buildings, we coordinate a helicopter lift — flying the equipment directly onto the roof.
Are you a helicopter company?
No — Good Air is a licensed mechanical contractor. We engineer the rigging, prep the equipment and the roof, and manage the project; a licensed helicopter lift operator handles the actual flight. If you're searching for a helicopter HVAC lift company, you want the mechanical contractor coordinating the job, not an aviation charter service that's never rigged a chiller.
Do you provide helicopter lift HVAC installation outside South Florida?
Yes. Our day-to-day AC and plumbing service area is Broward, Miami-Dade, and Palm Beach counties, but we take on helicopter lift HVAC projects anywhere in Florida — Tampa, Orlando, Jacksonville, and everywhere between. Call to discuss your building and location.
Is our HOA or condo board involved in scheduling a lift?
Yes — we work directly with the board or property manager on scheduling, resident notifications, and any building-specific approvals before lift day, the same way we handle any occupied-building project.